How to Decorate Kids' T-Shirts


Hammered Leaf Prints Kids' T-Shirt

Kids who love nature will love making the hammered leaf prints kids' T-shirt. Make your T-shirt truly personal by using leaves from your own backyard.

What You'll Need:

  • Small board (1/2 to one inch thick)
  • Newspaper
  • 100% cotton garment or fabric
  • Leaves
  • Waxed paper
  • Masking tape
  • Hammer
  • Alum
  • Water
  • Salt

How to make the hammered leaf prints kids' T-shirt:

Step 1: Cover a small board with two or three layers of newspaper. Lay your fabric on the board. Open up the bottom of the t-shirt and slip the board and newspaper inside.

Step 2: Arrange a variety of leaves on the fabric. Cover with a sheet of waxed paper, and tape the corners of the waxed paper to the fabric.

Step 3: Pound with the hammer until you have pounded every part of the leaf. When you are done, lift off the waxed paper. You'll see a leaf print.

Step 4: To set the print, soak for two minutes in a mixture of three tablespoons of alum and one gallon of warm water. Wring out the excess fluid, then soak the fabric in a mixture of 1/4 cup of salt and one gallon of warm water.

Remove the fabric, rub off any clinging bits of leaf, wring, and let it dry. Wash by hand in cold water.

A simple white T-shirt becomes a beautiful, colorful treasure with the batik kids' T-shirt project in the next section. Keep reading to learn more.

Looking for more great kids' crafts? Try: